OTEAC provide support for our customers out with normal office hours. In the event of an emergency please use the following procedure:
Listen to the recorded message which will give options to direct you to the correct mobile telephone number based on the service you require.
24th May 2018
Aberdeen based engineering firm, Nucore Group, is successfully broadening its focus within the energy industry – most notably in offshore wind - as it confirms a number of successful projects and contract awards within the sector.
The group, headquartered at Bridge of Don, a stone’s throw away from the Aberdeen Bay wind farm project, now protects and maintains some of the UK’s largest wind farms providing fire suppression and safety systems.
Last month the group’s two firms - Oteac Ltd and HVAC & Refrigeration Engineering Ltd commenced contracts for the maintenance of fire and gas detection and suppression systems, FGas checks and HVAC equipment on the Walney 3 and Walney 4 substations for the Walney Extension offshore wind farm in the Irish Sea. The Walney Extension will be one of the largest wind farms in the world and when site testing is complete is expected to generate clean electricity by 2019.
Graham Boyne, Offshore Sales Manager commented: “The message at the All Energy conference in Glasgow earlier this month was about strengthening the supply chain in the renewables sector. As a group, we are well placed to provide combined services incorporating the design, installation, commissioning, and maintenance of fire suppression, safety and HVAC systems for wind farms across Europe.”
In addition, Oteac recently secured a 4-year contract with Statoil (now equinor) to deliver servicing and maintenance of fire and gas systems on the Sheringham Shoal windfarm transformer platform, off the coast of Sheringham, North Norfolk. As part of the same project, Oteac had previously designed, supplied, installed and commissioned fire protection and detection on this asset and its onshore control station and will continue to inspect and maintain the equipment on a bi-annual basis, protecting infrastructure and personnel.
The windfarm which has been fully commissioned for over 5 years includes 88 turbines, two 900-tonne offshore sub-stations and has a capacity of 317 megawatts (MW). It powers 220,000 British homes with clean energy, resulting in a reduction of around 500,000 tonnes of CO2 emissions every year.
Supporting its expansion in offshore wind, Oteac has installed a new Compressed Air Foam (CAF) system for a large UK wind farm on behalf of one of Europe’s leading energy companies. It protects the electrical transformers on-board the offshore wind farm substation. When in use, the system detects fire using high integrity flame detection and voting logic. In the event of a fire, the system creates a blanket of foam to quickly extinguish a fire, excluding oxygen, cooling and containing the fire within the vicinity. The environmentally benign foam, produced by Solberg, is the first of its kind to be used in an offshore wind farm environment.
Dave Fyfe, Offshore Service Manager said: “Transformers contain oil and coolants known to present a potential fire risk to personnel and assets – the self-contained compressed air foam system (CAF) helps mitigate the risk to as low as reasonably practicable.
The industry has evolved with operators investing heavily in the design, construction and technology used in the production of wind turbines and are now deploying third generation turbines. These are significantly more expensive and powerful than the first generation turbines therefore requiring fewer turbines to generate the same levels of power. It is critical for the supporting transformer platforms and substations, which are vital to the operational productivity and integrity of a wind farm, to have sufficient fire protection to minimise risk and liability to these investments.”
If a fire were to occur around the transformers, it could result in daunting repair bills, lost revenue and operational downtime. The CAF system provides protection to the most volatile, but also the most valuable area on the platform.
Nucore Group is a portfolio of specialist engineering companies which provide engineering products and services, from fire and security to climate control engineering. Headquartered in Aberdeen with over 33 years of group experience, Nucore Group currently comprises Oteac Ltd and HVAC & Refrigeration Engineering Ltd. Operating internationally with over 130 employees the group businesses support the oil and gas, marine, renewable and petrochemical industries, as well as large private and public-sector clients.
Our client wanted to extend the life-cycle of their platform's fire and gas system to ensure the system would be fit-for-purpose and reliable for another 20 years. So, our team engineered a fit-for-purpose solution.
We recently installed a fire and security system for multiple teleport satellite offices for our client Forth Electrical Services (FES)
We service and maintain the fire alarm system for the Union Square Shopping Centre. Westway Services manage the maintenance, services, and compliance for Hammerson’s Union Square retail site located in Aberdeen, UK.